About the Program
This program enhances the abilities of the students preparing for a career in welding technology by giving them: Welding Safety, Oxyfuel Cutting, Plasma Arc Cutting, Air Carbon Arc Cutting and Gouging, Base Metal Preparation, Weld Quality, SMAW Equipment and Safety, Shielded Metal Arc Electrodes, SMAW Beads and Fillet Welds, Joint Fit-Up and Alignment, SMAW Groove Welds and Backing, and SMAW Open V-Groove Welds. Welding is a high-tech industry that can take you places all over the world. From ladders to aircraft carriers, from NASCAR to national defense, and from the laboratory to sales and repair, the varied welding industry impacts virtually every industry. Technology is creating more uses for welding in the workplace. For example, new ways are being developed to bond dissimilar materials and non-metallic materials, such as plastics, composites, and new alloys. Also, advances in laser beam and electron beam welding, new fluxes, and other new technologies and techniques all point to an increasing need for highly trained and skilled workers.
Program Requirements
For current program requirements -> 2024-2025
Program Goal: Other
GE Pattern(s): None
Program Code: WELDINGLEVELI.CC
Program Learning Outcome(s):
Upon successful completion of this program, the student will be able to:
Setup and safely operate welding equipment.
Operate the SMAW units to weld in the flat, horizontal, vertical, and overhead positions.
Demonstrate proper welding process of groove welds (with backing and open) per qualification procedures set by the AWS.
Unit(s): 4.00
Transfer Status: CSU
Contact Hours:
17.00 hours Lecture
/ 153.00 hours Lab
Total Course Hours: 170.00
This course includes oxyacetylene welding (OAW), oxyacetylene cutting (OFC-A) and shielded metal arc welding (SMAW) processes, in the flat and horizontal positions on various joint details. It will also include safety procedures, electrode identification, joint fit-up and alignment, base metal preparation, weld quality, beads and fillet welds, with focus on theory and practice. All welds will meet the American Welding Society (AWS) qualification standards.
Prerequisite(s): WLD 20
Unit(s): 4.00
Transfer Status: CSU
Contact Hours:
17.00 hours Lecture
/ 153.00 hours Lab
Total Course Hours: 170.00
In this course students will perform welds in positions other than flat and horizontal. The content will enhance the ability of the students to perform welds out of position. The course includes welding safety, shielded metal arc welding (SMAW), gas metal arc welding (GMAW), plasma arc cutting (PAC), air carbon arc cutting and gouging (CAC-A) welding and cutting processes. These welds will be performed in the flat, horizontal, vertical, and overhead positions. It will also include base metal, shielded metal arc welding electrodes, joint fit-up and alignment, groove welds with backing, and open V-groove welds. All welds will meet the American Welding Society (AWS) qualification standards.
Prerequisite(s): WLD 20
Unit(s): 0.50
- 1.00
Transfer Status: NT
Contact Hours:
0.00 hours Lecture
/ 25.50 hours Lab
Total Course Hours: 25.50
This is a supervised lab experience for intermediate welding students. Students will practice skills in shielded metal arc welding (SMAW), gas metal arc welding (GMAW), oxy-fuel cutting (OFC), plasma arc cutting (PAC),and air carbon arc cutting and gouging (CAC-A). Welding and cutting processes will be in the flat, horizontal, vertical, and overhead positions on groove welds with backing and open V-groove welds. All welds will meet the American Welding Society (AWS) qualification standards.
SubMenu
Contacts
Russell Pitter, Chair
(530) 895-2586
Department Office: WM 107
(530) 895-2501
Counseling and Advising:
(530) 895-2378
Follow Us on Social Media